Transportation - Inspections

Vehicle Inspections – Transportation

Click on the Waffle to open your icons

Click on the + in the upper right corner

Select Create Inspection from the menu

Page for the mobile app that shows the tiles to launch the applications available

Click on the > in the Asset section to Select an asset (Vehicle your inspecting)

Click on the > in the Template section to Select the inspection template

Page to begin the inspection where you select an asset and inspection template

Selecting a vehicle to inspect

DO NOT TYPE IN THE BOX – IF YOU DO IT’S GOING TO CAUSE PROBLEMS AND YOU’LL PROBABLY HAVE TO START OVER

Select the 3 vertical dots next to the box labeled asset

If you select Search then search for the vehicle (easiest to use the VEH number)

If you select Scan then scan the barcode on the vehicle

Search for a Vehicle

· Vehicle number

· Key words like Trolley, Van, etc.

OR Scan a barcode (located on the vehicle inside the door. Make sure you’re scanning the Facilities Asset Barcode.

This will open your camera – center the barcode with the red line and the asset will be added

NOTE: If you didn’t allow Maximo to access your camera, you’ll need to update this setting before you can scan. Settings > Privacy & Security > Camera: Make sure IBM Maximo is turned on.

Select the Inspection Template = Transportation Daily Vehicle Inspection

Click on the Continue Button

Select >> Start

Enter Odometer Reading

a. The system will throw an error that must be fixed if you enter an odometer reading less than the prior odometer reading.

Approach >> If Working Properly, select that button. If the vehicle needs to go to the Auto Garage, select Requires Maintenance

a. Leaks

b. Bus Level

Interior>> If Working Properly, select that button. If the vehicle needs to go to the Auto Garage, select Requires Maintenance

a. Fire Extinguisher

b. Reflectors

c. First Aid Kit

d. Interior Mirrors

e. Sun visor

f. Seat Cushions / Frames

g. Seat Belts

h. Emergency Doors / Hatches

i. Service Doors and Steps

j. Handrail

Driver Area >> If Working Properly, select that button. If the vehicle needs to go to the Auto Garage, select Requires Maintenance

a. Interior / Gauge Lights

b. Horn

c. Fuel Gauge

d. Oil Pressure Gauge

e. Water Temp Gauge

f. Ammeter and Voltmeter

g. Speedometer / Tach

h. Windshield Wipers

i. Defroster Fans

j. Heater Fans

k. Vandal Locks

l. Mirror Adjustments

m. Two-Way Radio Check

n. Ignition

o. Cleanliness

Exterior >> If Working Properly, select that button. If the vehicle needs to go to the Auto Garage, select Requires Maintenance

a. Rear View Mirrors

b. Pedestrian Mirrors

c. Wheels and Tires

d. Body and Paint Damage

e. Windows / Windshield

f. Battery Box / Batteries

g. Exhaust System

h. Fuel Cap

i. Emergency Doors

j. Headlights (High/Low)

k. Clearance / Marker Lights

l. Sign Lights

m. Back-Up Lights / Beeper

n. Stop Lights

o. Turn Signals ad 4-ways

p. License Plate Lights

Wheelchair

a. Special Service Door

b. Door Warning Mechanism

c. Posted Decals/Warnings

d. Control Mechanism

e. Lift Operation

f. Break Test Service

g. Break Test Emergency

Driver Confirmation

a. ADD ANY COMMENTS - ESPECIALLY IF THE VEHICLE REQUIRES MAINTENANCE (not required)

b. Click on the + to add your signature affirming your answers

c. Click on Save

The Complete button will turn Blue once all the questions have been answered

Click on Complete to finish the inspection

Click on Done to go back to the In Progress Inspections

To find a completed inspection

Click on the waffle

Select the Inspection Tile

Select Completed from the drop-down menu in the upper left

Use the Magnifying Glass to search or scan a barcode for a completed inspection

Click on the View Inspection Button to view the Inspection form and answers