Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

This only applies to non-school owned computers. Printers are pushed automatically to faculty laptops and desktops.

The old method of using SURA to load the plot room printers no longer works.

Printing from off campus is not supported.

How to add an ARCH network printer

  1. Right click the Windows start button and choose Run.

  2. Enter \\arch-print.ad.syr.edu and click OK.

  3. A login box should appear. Fill in your NetID and password. Your NetID must have ad\ in front. Enable 'Remember my credentials'.

  4. A list of printers will appear. Double click a printer to add it. Learn about the various Plot Room printers here.

    Choose the Postscript printer whenever you see two names for the same printer.



    Here’s a list describing each Faculty suite printer. We recommend adding the two closest B&W printers plus at least two color.

    Printer name

    Model

    Installed Options

    Type

    ARCH-FAC-306-LJ5200HP LaserJet 5200Tray 3, DuplexB&W laser
    ARCH-FAC-306-COLORHP Color LaserJet 5550Tray 3, DuplexColor laser
    ARCH-FAC-308-LJ5200HP LaserJet 5200Tray 3, DuplexB&W laser
    ARCH-FAC-308-COLORHP Color LaserJet 5550Tray 3, DuplexColor laser
    ARCH-FAC-324-LJ5200HP LaserJet 5200Tray 3, DuplexB&W laser
    ARCH-FAC-326-LJ700HP LaserJet 700 M712Tray 3, DuplexB&W laser
    ARCH-FAC-326-COLOR2   HP Color LaserJet CP6015xTray 3, DuplexColor laser


    You may wish to add a couple of large format printers from the plot room:

    Plot Room, 013 Slocum - Large Format Printers
    Printer nameModel

    Type

    ARCH-LumaOce Plotwave 360Color large format
    ARCH-Luma-PostscriptOce Plotwave 360Color large format
    ARCH-PeachHP DesignJet T7200psColor large format
    ARCH-Peach-PostscriptHP DesignJet T7200psColor large format
    ARCH-PichuHP DesignJet T7200psColor large format
    ARCH-Pichu-PostscriptHP DesignJet T7200psColor large format
    ARCH-Pichu2HP DesignJet T7200psColor large format
    ARCH-Pichu2-PostscriptHP DesignJet T7200psColor large format
    ARCH-Pichu3HP DesignJet T7200psColor large format
    ARCH-Pichu3-PostscriptHP DesignJet T7200psColor large format
    ARCH-Yoshi2HP DesignJet T1700psColor large format
    ARCH-Yoshi2-PostscriptHP DesignJet T1700psColor large format
  5. The Connecting box will say 'Looking for a driver' and then may say 'Downloading a driver'.

  6. The printer should then be available for printing. It will also appear under Windows Settings > Devices > Printers & Scanners.
  7. Repeat this process as many times as you like to add the various printers.

Fix Access Denied Error

  1. Your annual NetID password change may cause printing to stop working because it has stored the old password. To fix, update the password in Windows Credential Manager.
    1. In the Windows search box, type 'credential' and click Credential Manager.
    2. Click Windows Credentials and expand the entry for arch-print.ad.syr.edu.
    3. Click Edit and fill in your new NetID password and click Save.

How to release your print job

  1. Send your print to the printer.

  2. After your job finishes spooling, release your print using the school's PaperCut web page. Make sure you use Architecture's PaperCut web page (https://arch-print.syr.edu) and not SU's page (https://printing.syr.edu), which look similar except for the logo.

  3. Login with your NetID credentials.

  4. After logging in, release your job from the Jobs Pending Release screen. You can select {print} or Release All.

  • No labels