Versions Compared

Version Old Version 41 New Version Current
Changes made by

Andrew Molloy

Andrew Molloy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Printing from off campus is not supported.

Table of Contents

How to add an ARCH network printer

Before going further, you will need to install the SU Azure VPN following these directions (not needed if you are at the Fisher Center in NYC).

  • Once you have the VPN installed, before adding the printers, start the VPN app and sign in. When you are done adding the printers, disconnect the VPN.

  • Every time you want to print, you'll need to first start the VPN, then send the print. When done printing, disconnect the VPN.

  1. Right click the Windows start button and choose Run.

  2. Enter \\arch-print.ad.syr.edu and click OK.

    Image Removed


    Image Added


  3. A login box should appear. Fill in your NetID and password. Your NetID must have ad\ in front. Enable 'Remember my credentials'.

    Image Removed


    Image Added


  4. A list of printers will appear. Double click a printer to add it. Learn about the various Plot Room printers here.

    Choose the Postscript printer whenever you see two names for the same printer.

    Image Removed


    Image Added

    Plot Room, Slocum 013
    Printer nameModel

    Type

    ARCH-Bowser3HP LaserJet M806B&W laser
    ARCH-Bowser4HP LaserJet M806B&W laser
    ARCH-Koopa3HP Color LaserJet M855xhColor laser
    ARCH-Koopa3-PostscriptHP Color LaserJet M855xhColor laser
    ARCH-Koopa4HP Color LaserJet M855xhColor laser
    ARCH-Koopa4-PostscriptHP Color LaserJet M855xhColor laser
    ARCH-Luma-Postscript***Oce Plotwave 360Color large format
    ARCH-PeachHP DesignJet T7200psColor large format
    ARCH-Peach-PostscriptHP DesignJet T7200psColor large format
    ARCH-PichuHP DesignJet T7200psColor large format
    ARCH-Pichu-PostscriptHP DesignJet T7200psColor large format
    ARCH-Pichu2HP DesignJet T7200psColor large format
    ARCH-Pichu2-PostscriptHP DesignJet T7200psColor large format
    ARCH-Pichu3HP DesignJet T7200psColor large format
    ARCH-Pichu3-PostscriptHP DesignJet T7200psColor large format
    ARCH-Yoshi2HP DesignJet T1700psColor large format
    ARCH-Yoshi2-PostscriptHP DesignJet T1700psColor large format


    Warning
    *** Luma requires a different process. See below.


    Smith 336 Studio

    Printer nameModel

    Type

    ARCH-Smith-ColorHP Color LaserJet cp5520Color laser


    NYC Printers, Fisher Center

    Printer nameModel

    Type

    ARCH-Bart2-PostscriptHP Color LaserJet cp6015xColor laser
    ARCH-Homer2HP DesignJet T1500 - PostscriptColor large format
    ARCH-Homer2-PostscriptHP DesignJet T1500 - PostscriptColor large format
    ARCH-LisaLisa2-PostscriptHP DesignJet T7100psT1700psColor large format
    ARCH-MaggieHP LaserJet M725B&W laser


  5. The Connecting box will say 'Looking for a driver' and then may say 'Downloading a driver'.

    Image Removed


    Image Added

    Image Removed


    Image Added


  6. The printer should then be available for printing. It will also appear under Windows Settings > Devices > Printers & Scanners.

    Image Removed


    Image Added

  7. Repeat this process as many times as you like to add the various printers.

Adding Luma - Special procedure

  • If you get an 'access denied' message when trying to add ARCH-Luma-Postscript, follow these steps.

    1. Download the Luma Postscript driver here.

    2. Move the driver file to its own folder (create a folder and copy or move the file into it).

    3. Unzip/Extract the file. You should be left with a folder called 1.

      34

      35 PS3.

    4. In the Windows search box, type 'control panel' and open the app.

      Image Removed


      Image Added


    5. Under Hardware and Sound, click 'View devices and printers'.

      Image Removed


      Image Added


    6. Windows 10: Single click on any one of the existing printers. This will cause a new menu item to appear at the top called 'Print server properties'. Click Print server properties.

      Image Removed


      Image Added



      Windows 11: Under Printers & Scanners, scroll down to Related settings and click Print server properties.

      Image Removed


      Image Added


    7. In the Print Server Properties box, click the Drivers tab. Then click the Add button.

      Image Removed


      Image Added



    8. The Add Printer Driver Wizard will start. Click Next and click Next again.

    9. Click 'Have Disk'. Click 'Browse'. Now browse to find the folder you unzipped/extracted, which was called '1.34 PS3' unless you renamed it. Keep browsing all the way down to the 'StandardFonts' subfolder. It's several levels deep.

      Image Removed


      Image Added


    10. Once you are inside StandardFonts, you should see a file called OEMSETUP.INF. Select this file and then click Open.

      Image Removed


      Image Added


    11. Click the OK button.

      Image Removed


      Image Added

    12. A list of printers will appear. Scroll down the list and select 'OCE PlotWave 360 PS', then click Next.

      Image Removed


      Image Added


    13. Wait up to 30 seconds while the driver installs. Then click the Finish button.

    14. Now that the Luma driver is installed, go back to Step 4 in the previous section and double click the printer to add it.

Fix Access Denied Error

  1. Your annual NetID password change may cause printing to stop working because Windows has stored the old password. To fix, update the password in Windows Credential Manager.

    1. In the Windows search box, type 'credential' and click Credential Manager.

      Image Removed


      Image Added


    2. Click Windows Credentials and expand the entry for arch-print.ad.syr.edu.

      Image Removed


      Image Added

    3. Click Edit and fill in your new NetID password and click Save.

      Image Removed


      Image Added

How to release your print job

  1. Send your print to the printer.

  2. After your job finishes spooling, release your print using the school's PaperCut web page. Make sure you use Architecture's PaperCut web page (https://arch-print.syr.edu) and not SU's page (https://printing.syr.edu), which look similar except for the logo.

  3. Login with your NetID credentials.
    Image Removed

    Image Added


  4. After logging in, release your job from the Jobs Pending Release screen. You can select {print} or Release All.

    Image Removed



    Image Added