Page Comparison

1. Start the Zoom meeting, Join with computer audio
2. Select your Microphone and Speaker you wish to use
   
   
   

3. Testing audio before joining a meeting

   If you haven't enabled the setting to automatically join by computer audio, you can test your speaker and microphone before joining a meeting:

   1. After joining a meeting, click Test Speaker and Microphone.
      
   2. The meeting will display a pop-up window to test your speakers. If you don't hear the ringtone, use the drop-down menu or click No to switch speakers until you hear the ringtone. Click Yes to continue to the microphone test.
      
   3. If you don't hear an audio replay, use the drop-down menu or click No to switch microphones until you hear the reply. Click Yes when you hear the replay.
      
   4. Click Join with Computer audio to exit the speaker and microphone test.
      
   5. Click Join with Computer Audio to join the test meeting with the selected microphone and speakers.
      

...

1. Click Test Speaker to play a test tone. 
2. If you cannot hear it, select a different speaker from the menu or adjust the Volume.
   

...

Testing your microphone

1. In the Microphone section, you will see the green Input Level bar move when Zoom is picking up audio. 
2. Click Test Mic to test your microphone. 
3. Your audio will start recording. Click Recording when you are done and it will play back. You can select another microphone from the menu or adjust the input level.
4. Check Automatically adjust microphone settings if you want Zoom to adjust the input volume automatically.