Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Figure 1_Document Camera

 

Registrar classrooms may include a Document Camera. The Document Camera will allow users to display their material through the rooms projection system. The Document Camera, is usually located on the teaching station in front of the room. The user can control the Document Camera manually or through the Touch Panel, (if one is installed in the room). Models of Document Cameras may vary in rooms, but are all of the same brand and have the same functionality.


 

 

Turning on the Document Camera

When entering the room, the Document Camera may be found in an off postion (See: Figure 2_Doc Cam_Off Position)

Figure 2_Doc Cam Off Position

To turn the Document Camera on, follow these steps:

  • Grasp the tab on the arm of the Document Camera, and lift to an upright position (See: Figure 2.1_Doc Cam_Arm) 

Figure 2.1_Doc Cam_Arm

  • The Document Camera should now be in the following position (See: Figure 2.2_Doc Cam_Upright)

  • Next rotate the head of the Document Camera to a parallel position (See: Figure2.3_Doc Cam_Head and Figure2.4_Doc Cam_On Position)

 Figure2.3_Doc Cam_Head

Figure2.4_Doc Cam_On Position

  • To manually turn on the Document Camera, press the power button on the upper left corner of the Document Camera (See: Figure 2.5_Doc Cam_Power Button) 

 

 


 

 

 

 

  • No labels