Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Figure 1_DVD VCRImage RemovedThere are multiple ways to view DVD sources within a classroom. Figure 3_Blu-Ray PlayerImage Added

This document will give instructions on play DVDs, VHS tapes, on how to play DVDs and Blu-Ray discs with the appropriate technology. Included are instructions for DVD/VCR players, Blu-Ray players , and the Windows computerin registrar classrooms.

Table of Contents

 

 

DVD/VCR Players

 

Figure 1_DVD VCRImage Removed

 

 

 

 

 

 

 

 

 

If a DVD/VCR combo unit is in the classroom, VHS tapes or DVD's can be played off of this device. To use this device, follow these instructions:

  • Turn on the technology system
  • Select DVD/VCR as the projected source
    • A command should be sent to turn on the DVD/VCR player 
  • Press the eject button on the DVD/VCR (See: Figure 1.2_DVD VCR_Insert)
    Figure 1.2_DVD VCR_InsertImage Removed
  • Insert the disc or tape and press the eject button again to close the device
  • Make sure that the DVD/VCR player is in the correct mode (See: Figure 1.3_DVD VCR_Select Mode)
    • DVD or Video, will need to be selected 
    Figure 1.3_DVD VCR_Select ModeImage Removed
  • Use the controls on the player, to Play/Pause/Stop/Rewind/Fast-Forward the video being projected (See: Figure 1.3_DVD VCR_Select Mode)
  • Controls may also be found on the Touch Panel, if one is present in the room. (See: Figure 2_Touch Panel_DVD Controls)
     Figure 2_Touch Panel_DVD ControlsImage Removed
  • A remote control can also be found in the accessory drawer located on the teaching station or on the technology rack in the room.



Blu-Ray Players

Figure 3_Blu-Ray Player

Newer rooms Rooms may include a Blu-Ray player in the technology system. These players are able to play both DVDs and Blu-Rays. It is recommended, that if present, the Blu-Ray is used to play DVDs. The following instructions explain how to use this device:

  • Turn on the technology system
  • Select Blu-Ray as the projected source
    • A command should be sent to turn on the Blu-Ray player 
  • Press the eject button on the Player (See: Figure 3.2_Blu-Ray_Disc Insert)
  • Insert the disc or tape and press the eject button again to close the device
    Figure 3.2_Blu-Ray_Disc InsertImage Modified

 

Playing DVDs with the Windows Computer

 
  •  A remote controller can also be found in the accessory drawer located on the teaching station or on the technology rack in the room.
  • Controls may also be found on the Touch Panel, if one is present in the room. (See: Figure 4_Touch Panel_Blu-Ray Controls)  
    Figure 2_Touch Panel_Blu-Ray ControlsImage Added


If the technology does not function as described please call 315-443-2677 for assistance.