Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents
typeflat
separatorpipe

Assisted listening device  

  • These devices receive all audio being projected in the room speakers and can be worn by users with hearing disabilities. Users have the ability to control volume and listen through an earpiece (3.5mm jack) that is connected to the body pack receiver. 
  • Located in the drawer inside the locked closet (accessible with the same room key) by the windows, the assisted listening device can be turned on by sliding the wheel to the left (out of the OFF position).  

assisted listening drawerassisted listening assisted listening on off

  • Use the Seek button or Channel Select buttons if you're unable to hear any sound, the device should be on channel R 

assisted listening seekassisted listening channel

  • Remember to switch the device off to preserve the battery.  

Camera (video conference)  

  • A room-facing camera is located under the HD Display Screen. It can be accessed through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC.  

cameraImage RemovedcameraImage Added

Computer speakers  

  • Speakers are mounted on each side of the HD Display Screen on the wall. 

speakersspeakers 2

  • They can be accessed via the Presenter PC (Settings->System->Sound) or HDMI input on your personal device.  

speakers device

  • Volume can be adjusted via the Media Controller under Volume 

speaker volume

Conference phone capable  

  • Located at the Circulation desk (Bird library, first floor), the conference phone can be checked out, along with your room key, at the time of the event.

conference phone bagImage Addedconference phoneImage Added

  • Locate an Ethernet port in the room to connect the phone to (see Network). Use the provided Ethernet cable to plug the phone in (ports that start with 2tb followed by numbers are active).Connect the provided Ethernet cable to the Ethernet port.

ethernet cableImage Added

  • Connect the USB-C-to-Ethernet adapter to the USB-C port on the back of the phone. Then, connect the Ethernet cable to the Ethernet port on the adapter.

conference phone usb-c portImage Addedconference phone usb-c ethernet adapterImage Addedconference phone ethernet connectedImage Added

  • The screen may flash for a second, then you'll see the boot screen while the phone is starting (takes about a minute). Once finished booting, the main screen will show up displaying the conference phone's phone number.

conference phone boot screenImage Addedconference phone main screenImage Added

  • Instructions on how to start a conference call is located here.
  • An overview of the phone schematics and instructions is located here.
  • add picture below...Additional wired microphones (with Mute buttons) are available with the phone, they connect to the ports located on the left and right side of the phone. You can extend the microphones up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7 feet (2.1 m) away from the phone. 

conference phone additional microphonesImage Addedconference phone wired microphone portImage Added

HD display screen  

  • Located in the front of the room, mounted on the wall.  

hd screenImage Removedhd screenImage Added

  • The display can be turned On and Off from the Media Controller under Display 

hd screen control

HDMI  

  • Located on the Media Controller, an HDMI input is available to connect personal devices to the HD Display Screen. An HDMI cable is located in the locked closet by the window. 

hdmi inputhdmi cable

  • Select HDMI from the Media Controller to activate the input.  

hdmi input 2

  • An HDMI to mini DisplayPort adapter is available in the drawer inside the locked closet by the window.  

hdmi displayport adapter

Keyboard and mouse (wireless)  

  • A wireless keyboard and mouse are located inside the locked closet (accessible with the same room key) by the window. 

keyboard mouse wirelessImage Removedkeyboard mouse wirelessImage Added

  • No setup is necessary. If either device does not respond, try replacing the battery (spare batteries are available in the cabinet inside the locked closet by the window). 

batteries spares

Media controller (non-touch panel)  

  • Located on the wall to the left of the HD Display Screen, this is used to control the input of the devices available in the room.  

media controller

  • An HDMI and two USB ports (one is used by the wireless keyboard and mouse in the room) are available. 

Microphone (wireless handheld, lapel, room) 

  • Wireless handheld and lapel microphones are located in the drawer inside the locked closet by the window.  

microphones

  • Hold down the Power/On-Off button for a few seconds to turn on and off.  

microphone on offmicrophone on off 2

  • Microphones should be on the 566.600 MHz frequency (as noted on the receiver in the locked closet). 

microhpone frequency

  • Remember to turn microphones off to preserve batteries.  
  • Replacement batteries are located in the same drawer as the microphones.  

microphone batteries

  • Microphone volumes can be adjusted via the Media Controller panel under Mic. Volume 

microphone inputImage Removedmicrophone inputImage Added

  • Room microphone is located on the ceiling of the room and available through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC. 

microphone ceiling

  • Additional/relevant information located here.

Anchor
network
network
Network (wired, wireless)  

  • An Ethernet cable is available in the locked closet by the window. Ports Ethernet ports are located on the wall below the Media Controller, closer to the floor  
ethernet cableImage Removed
  • (ports that start with 2tb followed by numbers are active).

Ethernet ports

Presenter PC 

  • A Windows PC is available inside the locked closet by the window 
presenter pcImage Removed
  • . Select PC from the Media Controller to access it.

presenter pcImage Addedpc input buttonImage Added

  • You can log in using your NetID and password or via the Guest account.  
  • Software list 

Anchor
videoconference
videoconference
Videoconferencing software settings 

  • When using videoconferencing software, the device settings should be set as followed: 
    • Camera – PTZ Pro 2 
    • Speaker – ExtronScalerD 
    • Microphone – Microphone (USB Audio CODEC)