111 has a single touch panel which connects all of the classrooms monitors and inputs into one easy to use touch screen.

The primary screen which will be displayed at the beginning of a session is shown below, and has two primary options - "Dual Projectors" and "Projectors and Monitors"

Projector and Monitor operation

Selecting the "Dual Projectors" option displays the Local PC onto the left and right projectors mounted to the ceiling.  

...

When either initial option is selected the touch screen will display the screen shown below.

Adding Monitors or Projectors

If specific monitors or projectors want to be turned on or off there are "Projector Control" and "Monitor Control" options located at the bottom of the touch screen under "Utilities," as shown in the image below.

...

The monitors can be individually turned on or off, and can swap between the inputs (Local PC or Laptop).

Laptop Operation

At the top of the teaching podium there is a VGA with audio connection for professors to display their own laptop onto the classroom monitors and projectors.  

...

Now the laptop will be displayed on the selected monitors and projectors.

Volume Control

The volume for either the local PC or laptop can be raised or lowered by the right hand volume control panel.  

...

To lower the volume of the room speakers tap the smaller speaker icon at the bottom, as highlighted in the image below. 

Support

If there are any questions feel free to contact the iLab Consultants located in room 011a, or by phone at 443-5025.

...