| Table of Contents |
|---|
...
When either initial option is selected the touch screen will display the screen shown below - the following sections describe all of the functionalities.
Adding Monitors or Projectors
If specific monitors or projectors want to be turned on or off there are "Projector Control" and "Monitor Control" options located at the bottom of the touch screen under "Utilities," as shown in the image below.
...
When "Projector Control" is selected the following page is displayed with all of the options.
The left and right projector can have the power and
Monitor Control
When "Monitor Control" is selected the following page is displayed with all of the options.
...
The monitors can be individually turned on or off, and can swap between the inputs (Local PC or Laptop).
Laptop Operation
At the top of the teaching podium there is a VGA with audio connection for professors to display their own laptop onto the classroom monitors and projectors.
...
If there are any questions feel free to contact the iLab Consultants located in room 011a, or by phone at 443-5025.
Shutdown and rebooting
Note: When "System Off" is selected the classroom takes approximately two minutes to shut down everything and then reboot for operation. Please do not turn the system off between classes.