...
Here is an Image of our PneumaticStapler.
ToolSpecifications
As you can see in the tool specifications diagram, our Brad Nailer accepts fasteners from 5/8” to 2-1/8” nails, and our Stapler accepts fasteners from ½” to 1-1/2”. The SOA Woodshop supplies these fasteners for student use.
...
- Do not drive fasteners close to the edge of the work piece as the wood may split, allowing the fastener to be deflected possibly causing injury.
Loading the Stapler
- Depress magazine release button and pull back magazine.
- Open magazine fully and turn tool sideways with discharge area pointed away from yourself and others. Load staples in channel.
- Push magazine forward until latch is engaged.
Loading the Brad Nailer
- Depress magazine release button and pull back magazine.
- Open magazine fully and turn tool sideways with discharge area pointed away from yourself and others.
- Load brads in channel.
- Push magazine forward until latch is engaged.
...