...
The Dust Collector MUST be used when operating this machine. Typically, the dust collector hose is connected to the Thickness Planer Machine, but can simply be transferred to the top dust port of the Thickness Sander when in use. The Dust collector is near the wall by the Thickness sander. It has a large, round RED button switch on the left side of the motor housing. To turn on the Dust Collector, pull outward on the RED “button”…to turn it off, push the button in.
Drum motor operation
- Connect power supply to machine. – Display remains dark.
- Turn on main power switch (A). – Display will illuminate. Racetrack (G) may flash continuously, indicating that emergency stop is still engaged.
- Rotate emergency stop (D) clockwise to disengage stop.
- Turn on drum motor by firmly pressing switch (B) – Illuminated circle (J) will run, and “ON” will illuminate.
...
- Note: If drum motor does not start, make sure conveyor speed dial (C) is set to OFF.
- Load indicator (H) may illuminate. – When motor is running without load, one bar may illuminate. More bars are illuminated as load increases.
- Turn off drum motor switch (B). – “ON” will go dark. Circle (J) will continue running for 5 seconds while drum slows to a stop. Then circle (J) will stop running.
...