...
For the 14” Saw, the blade shroud must be lifted and lowered manually by first unlocking it with the knob on the back. Position it above the fence height and lock it.) The blade guard or “shroud” accommodates material thickness and protects fingers. It also gives the blade support for more accurate cuts. Do NOTadjust adjust the 14” Saw’s blade shroud while the blade is moving! Always make sure the blade has stopped moving before adjusting the shroud.
...
The fence is attached, by placing it on top of the bed and hooking the metal clip at the far side onto the rail at the back, and then clamping down the lock handle in the front. The miter gauge can be added to the table by inserting it into the slot to the right of blade. Both of these devices can be used together or independently. The 14” Saw’s fence is stored on the left side of the saw “locked” into the two clips and the miter gage is gauge is stored on the right side.
...
Please be aware that there are 4 Trash barrels in this room, and that each one has a broom, bench brush and dust pan attached. You must use these items to clean up your work areas at each machine, when you are finished working there. Also, there are scrap barrels at each workstation to deposit scraps of material, which may be useful for someone else. Please do not put materials with stray hardware or glue on them, or food/drink items, only re-useable usable materials.