Safety
| Info |
|---|
| There is a PPE tag mounted to the front of the Saw stand which indicates that the operator must wear safety glasses, contain loose clothing and jewelry, and remove any extraneous materials from the work area. Hearing and respiratory protection is recommended, especially when using the saw for long durations. |
Additional Precautions
- Do not try to force the saw to do something it was not designed to do. For example, do not try to cut wood faster than the motor can handle, and use the right blade for the job.
- Do not over reach or stretch to get something when using this off keep proper footing and balance at all times.
- Turn the power disconnect switch to off before servicing the saw and when changing components or accessories such as blades, brake cartridges, and the like.
- Never leave the Saw running unattended. Wait until the blade comes to a complete stop, and then turn both the main power switch and the disconnect switch to off when you’re finished using a saw.
- Always maintain firm control over the material being cut. Never cut any material freehand.
- Never reach over a spinning blade for any reason.
Table of Contents
Table of Contents exclude Table of Contents
TABLE SAW
The Table Saw is commonly used for the processing of wood lumber, wood-based sheet / panel products and most sheet plastics. It’s powerful and stable enough to cut up standard 4’ x 8’ sheets of material, and accurate enough to cut parts as small as 1/8”.
...